221 Logeais St - Box 350 ~ Eden Valley, MN 55329

320- 453- 8311 phone - 320-453-8315 fax - info@riecoatings.com

 

Technical Data 

 

RIE 7409

Corrosion Protective Dry Film Lubricant

 

GENERAL DESCRIPTION

 

RIE 7409 is a dispersion of solid lubricants in an organic resin-solvent system. When applied to metal surfaces it forms an extremely adherent, dry film with excellent corrosion preventing properties and an operating temperature range of -94 to 716°F. The solid lubricants provide a low coefficient of friction and high load-carrying capacity under conditions where conventional lubricants are ineffective or undesirable.

 

RECOMMENDED USAGE

 

            * Very high loads, low speeds                                       * Dust is a problem

 

            * Extreme temperatures                                                * Oil and grease are not acceptable

 

            * When fretting is likely                                                 * Very low friction is needed

 

* Relubrication is not possible                                       * Corrosion prevention is needed

 

 

  PHYSICAL PROPERTIES

 

Dry film thickness………………………………………..

5 - 15 microns

Coefficient of Friction (LFW-1), after running-in………..

0.03

Temperature range, °F……………………………………

-95 to 715

Load-Carrying Capacity (LFW-1), Ncm2………………..

>80,000

Oil Resistance…………………………………………….

Good after heat curing

Resistance to Brake Fluid (DOT 3 and 4), at 392°F……..

Good after heat curing

Corrosion Protection, salt fog test, 12 micron coating thickness applied over zinc phosphate, hours…………….

 

>300

Wear Life (LFW-1), rotating, load 2860 N, speed 72 rpm, 7.9m/min, number of turns untilm = 0.1 (with phosphated substrate)………………………………………………….

 

 

400,000