221 Logeais St - Box 350 ~ Eden Valley, MN 55329
320- 453- 8311 phone - 320-453-8315 fax - info@riecoatings.com
RIE 1100
Corrosion Inhibiting Baking Phenolic
GENERAL DESCRIPTION
RIE 1100 is a one coat single component phenolic baked system
RECOMMENDED USAGE
* Provides a protective coating for all metals including magnesium.
* A clean coating for computer components, magnets and assemblies
* Offers high degree of resistance to- chemical corrosion, solvent softening and impact
* Exhibits good thermal stability.
PHYSICAL PROPERTIES
|
Vehicle Type |
Combination of epoxy/phenolic resins and thermosetting latent curing agents |
|
Pigmentation |
Carbon Black |
|
Color |
Gloss black, Flat black |
|
Film Thickness |
.3 - .8 mils depending on properties desired |
|
Withstands thermal shock with no sign of blistering, peeling, chipping, loss of adhesion or high temperature aging. |
|
|
Corrosion Protection |
ASTM B117 salt fog testing for 1,000 hours, over zinc phosphate. |
|
Resistance |
Excellent. Unaffected by immersion in various industrial solvents and hydraulic oils (i.e. Skydrol 500, Acetone, MEK, Trichloroethane, etc.). |
|
Impact Resistance |
Minimum .375 in. deformation before loss of adhesion evidenced by cracking and peeling of coating on upset area of panel when struck with a .250 in. radius round nosed impact rod. |
|
Dielectric Strength |
Minimum insulation with 500 vac applied, 1,100 MEG OHM. Insulation breakdown @ 500 vac minimum applied to test specimen |
|
Abrasion Resistance |
Wear life when test panels tested on tabor abrasive with #CS10 wheel installed @ 500 Gram Wgt. minimum 235 revolutions (average of 3 test specimens) minimum 225 revolutions (low test specimen). |
|
Cured Film Hardness |
4H - 5H |
|
Abrasion Test |
Cs-17 Wheel - 1000 Gram Load/1000 Cycles .139 Grams (139 mg). |